Small chassis
For walk-behind machines. Rigid, lightweight and with the resistance of stainless steel in a compact format.
- 3 mm thickness
- Stainless steel
- Compact design
It's not a sum of parts. Every component —motor, brush, suction, battery, control, chassis— is designed to work with the others. Engineering applied to performance, reliability and efficiency.
A professional cleaning machine is not measured by the power of an isolated motor, but by how all its systems respond at once: traction, braking, brushes, suction, energy and ergonomics. When every component is designed to work with the others, the result is a more reliable, more efficient machine that is easier to use for longer.
At CYNTEK we have implemented the technologies that best suit each model and machine type. Not every machine carries every extra, but all share the same philosophy: every detail exists to improve and optimise the real work of whoever is behind the machine.
The chassis is what holds the machine, absorbs impacts and protects the rest of the system. CYNTEK builds its chassis in stainless steel, 3 to 5 mm thick depending on model, with sizes covering the full range: from the most compact walk-behind units to large-format ride-on scrubbers. The structure is continuously welded at critical points to guarantee rigidity and durability, and linear low-density polyethylene (LLDPE) tanks complete the assembly, resistant to chemicals, impacts and temperature changes.
For walk-behind machines. Rigid, lightweight and with the resistance of stainless steel in a compact format.
For compact ride-on scrubbers. Balance between structural rigidity and contained weight.
For large-format ride-on scrubbers and high-performance machines. Maximum rigidity and load capacity.
Traction is what allows safe operation on any surface. Brushless motors deliver constant torque and immediate response. Motion control systems prevent the machine from sliding on slopes or running away in unexpected situations. Front suspension maintains wheel contact and cleaning quality.
Brushless traction motor: constant torque, immediate response and less maintenance than a traditional motor.
Bidirectional system that prevents the machine from rolling on slopes, both forwards and backwards.
Absorbs floor irregularities, maintaining wheel contact and scrubbing quality on uneven surfaces.
A good braking system is as important as a good motor. Dual brake systems combine mechanical and drum components to guarantee safe stopping in any circumstance. High-brightness LED headlights allow safe operation in dark facilities, loading docks or night shifts.
Combination of mechanical and drum brake for safe stopping in any situation. On advanced models, the intelligent adjustable brake adapts the response to weight and slope.
Clear visibility in dark facilities, loading docks and night shifts. Low consumption and high durability.
The cleaning system is the heart of the machine. Scrubbing brushes with adjustable pressure, quick-release systems for changing consumables without tools, suction nozzles that leave the surface dry after each pass and self-cleaning hoses to clean the machine itself at the end of the shift.
Brushes designed to drag dirt without damaging the surface. Adaptable to different floor types and dirt levels.
Regulable pressure depending on model and surface, from daily maintenance to deep cleaning. Between 30 and 55 kg depending on the machine.
Quick-release system for changing brushes, squeegees and filters without tools. Less downtime, more working hours.
Designed to drag dirt without leaving residue. Leaves the surface dry after each pass, with no puddles or marks.
On some models, the nozzle rises automatically when reversing to avoid dragging dirt or damaging the rubber lip.
Allows the machine itself to be cleaned at the end of the shift. Faster maintenance and a machine always ready for the next shift.
The squeegee is responsible for dragging the water and leaving the surface dry after each pass. Its blades are made of abrasion-resistant natural rubber, a material that maintains elasticity and drag edge even after hundreds of hours of friction against the floor.
Unlike other elastomers, natural rubber offers an optimal balance between flexibility and wear resistance: it adapts to pavement irregularities without losing contact, and resists continuous abrasion without hardening or cracking. The result is uniform drying over time and less wear on the consumable.
Energy determines how long a machine can work. CYNTEK uses automotive-grade lithium iron phosphate (LiFePO4) batteries in its most advanced models, with higher energy density, more charge cycles and lower weight than traditional batteries. The vehicle-grade safety charger protects both battery and installation throughout the charging process.
Automotive-grade lithium iron phosphate. Higher energy density, more charge cycles, less weight and greater safety than traditional batteries.
A machine is only as good as its operator working with it for hours. The ergonomic design of the driving position (on ride-on models) and of the handlebar (on walk-behind models) reduces fatigue, improves control and allows full shifts without loss of performance.
Handlebar and controls designed to reduce fatigue over long shifts. Height, angle and control position designed for the operator.
Driving position designed for full shifts: seat, steering wheel, pedals and visibility designed so the operator works comfortably with full control.
Every CYNTEK machine with its key data. Each model links to its full spec sheet.
| Model | Type | Voltage | Width | Performance | Tanks | Runtime |
|---|---|---|---|---|---|---|
| CX520-Z | Walk-behind | 24V | 520 mm | 2,600 m²/h | 65/75 L | 3–4 h |
| CX680-Z | Walk-behind | 24V | 680 mm | 3,400 m²/h | 65/75 L | 2.5–3 h |
| CX700 | Ride-on | 24V | 700 mm | 4,900 m²/h | 70/90 L | 2.5–3 h |
| CX800 | Ride-on | 24V | 760 mm | 5,320 m²/h | 90/100 L | 3–4 h |
| CX900 | Ride-on | 24V | 900 mm | 8,100 m²/h | 150/160 L | 3–4 h |
| CX1000 | Ride-on | 48V | 1,000 mm | 9,000 m²/h | 240/260 L | 3–4 h |
| CS1400 | Sweeper | 48V | 1,400 mm | 9,800 m²/h | 100 L hopper | 4–5 h |
We'll help you choose the right machine for your surface, your workload and your operation.