SCRUBBER-DRYER · RIDE-ON

CX1000

Maximum capacity for very large surfaces. Dual 500 mm brush system, 1,000 mm scrubbing width, 240/260 L tanks and 48 V electrical system with up to 9,000 m²/h of theoretical productivity.

CYNTEK CX1000
CX900
← LOWER MODELCX9008,100 m²/h · 900 mm
HIGHER MODEL →CX1000You are already on the largest model in the scrubber range
CX1000
9,000m²/hMAX. THEORETICAL PRODUCTIVITY
1,000mmSCRUBBING WIDTH
240/260LTANKS (CLEAN/RECOVERY)
3–4hMAX. RUNTIME
OVERVIEW

Maximum capacity for very large surfaces.

The CX1000 is a ride-on industrial scrubber-dryer with 48 V electric traction, designed for professional cleaning of hard floors in very large commercial, logistics and industrial facilities.

It features two 500 mm brushes with a 1,000 mm scrubbing width and a brush head with automatic adjustment via push rod, allowing it to adapt to the floor and maintain constant pressure. It integrates mechanical scrubbing, cleaning solution application and dirty water suction in a single pass.

Its motorised traction system (brushless rear drive wheel, 1,800 W) with accelerator pedal reaches up to 9 km/h, reducing working times and operator effort on very large surfaces.

CX1000 detail in use
PROFESSIONAL PERFORMANCE

Built to last.

STAINLESS STEEL CHASSIS

4–6 mm thick structure with double anti-corrosion primer and electrostatic powder coating.

AUTOMATIC BRUSH HEAD

Brush head adjustment via push rod, with up to 55 kg of pressure and actuator lifting.

EFFICIENT CLEANING

Scrubbing and suction integrated in a single pass, leaving the floor clean and dry.

HIGH PERFORMANCE

Up to 9,000 m²/h of maximum theoretical productivity with a 1,000 mm scrubbing width.

CLEANING SYSTEM

Where the magic happens.

Scrubbing head
01

Scrubbing head

Two 500 mm brushes with gearbox transmission and automatic adjustment via push rod to adapt to the floor.

  • Scrubbing width: 1,000 mm
  • 2 × 500 mm brushes at 200 rpm
  • Maximum pressure: 55 kg
  • Actuator lifting
  • Polypropylene (PP) brush, 0.5 mm bristles
Water application
02

Cleaning solution application

240-litre clean water tank with flow control from the control panel via solenoid valve.

  • Solution tank: 240 L (modified LLDPE)
  • Removable stainless steel filter
  • Panel control + solenoid valve
  • 40 mm drain hose
Suction system
03

Suction and squeegee

Two-stage suction system with a 1,350 mm U-shaped squeegee and actuator lifting.

  • 2 × 48 V / 500 W motors
  • Vacuum pressure: 18 kPa · Max. airflow: 28 L/min
  • 1,350 mm squeegee, stainless steel body and silicone blades
  • Pressure adjustment via two independent wheels
  • Actuator lifting · Tool-free blade replacement
SPECIFICATIONS

Detailed specifications.

All official technical data for the CX1000.

CX1000 angled view
PERFORMANCE DATA
Max. theoretical productivity9,000 m²/h
Scrubbing width1,000 mm
Suction width1,350 mm
Max. brush head pressure55 kg
Max. speed9 km/h
ELECTRICAL SYSTEM AND BATTERIES
Operating voltage48 V
AGM battery (standard)6 × 8 V / 150 Ah
Lithium battery (alternative)1 × 48 V / 200 Ah
Max. runtime3–4 hours
Battery indicatorVoltage level on gauge or LCD screen
Low battery protectionBrushes and suction stop
ChargerExternal (100–240 V AC, 50–60 Hz; 48 V DC, 20 A)
TRACTION AND MANOEUVRABILITY
Traction systemRear drive wheel with brushless motor
Traction motor power1,800 W (48 V)
DriveAccelerator pedal
Forward / reverseYes / Yes
Max. slope16°
BrakesElectronic / mechanical (service and parking)
TANKS AND BRUSHES
Solution tank240 L (modified LLDPE) · 40 mm drain
Recovery tank260 L (modified LLDPE) · 48 mm drain
Number of brushes2
Brush diameter500 mm
Brush speed200 rpm
Brush motor power2 × 750 W (48 V)
Standard brush materialPP (polypropylene) · 0.5 mm bristles
DIMENSIONS AND CONSTRUCTION
Dimensions (L × W × H)1,850 × 1,350 × 1,500 mm
Battery compartment (L × W × H)540 × 520 × 280 mm
Front wheel1 × 250 × 70 mm · solid polyurethane tyre
Rear wheels2 × 300 × 80 mm · solid polyurethane tyre
Chassis4–6 mm thick stainless steel
Noise level67 dB(A) at the operator's ear
SafetyFully guarded moving parts · emergency stop
CertificationCE
IS THIS YOUR MACHINE?

Talk to a distributor.

We help you confirm whether the CX1000 fits your surface and workload, or if you need a sweeper.