
Scrubbing head
500 mm diameter rotating brush that acts mechanically on the floor to loosen dirt and adhered residues.
- Rotation speed: 200 rpm
- Maximum pressure: 20 kg
- Pedal lifting
- Standard polypropylene (PP) brush
Robustness, durability and an optimised design for efficient cleaning on all types of surfaces. Its stainless steel chassis makes it resistant even in the most demanding environments.
The CX520Z is an industrial walk-behind scrubber-dryer with electric traction, designed for professional cleaning of hard floors in commercial, logistics and industrial facilities.
It combines mechanical scrubbing with a rotating brush, the application of cleaning solution and the suction of dirty water through a rear squeegee in a single operation. This system allows cleaning and collecting the residual water in one pass, reducing manual interventions and the time spent on cleaning.
Its motorised drive system (brushless rear wheel motor) makes the machine easier to move forward and reduces the operator's physical effort, allowing maintenance tasks on large surfaces with total comfort.
3–4 mm thick structure with two-layer anti-corrosion primer and electrostatic powder coating.
Exceptional resistance to corrosion and impacts, extending the machine's service life.
Scrubbing and suction integrated in a single pass, leaving the floor clean and dry.
Up to 2,600 m²/h of maximum theoretical productivity with up to 4 hours of runtime.

500 mm diameter rotating brush that acts mechanically on the floor to loosen dirt and adhered residues.

65-litre clean water tank that reduces refilling frequency during operations.

Two-stage suction system that collects dirty water and leaves the floor with less surface moisture.
All official technical data for the CX520Z.
| PERFORMANCE DATA | |
|---|---|
| Max. theoretical productivity | 2,600 m²/h |
| Scrubbing width | 520 mm |
| Suction width | 830 mm |
| Brush head pressure | 20 kg |
| Working speed | 5 km/h |
| ELECTRICAL SYSTEM AND BATTERIES | |
| Operating voltage | 24 V |
| Battery type (standard) | 2 × 12 V / 100 Ah AGM |
| Max. runtime | Up to 4 hours |
| Charger | External (100-240 V AC / 24 V DC / 15 A) |
| TRACTION AND MANOEUVRABILITY | |
| Traction system | Brushless rear wheel motor |
| Traction motor power | 500 W (24 V) |
| Max. slope | 16° |
| Brakes | Electronic (service and parking) |
| TANKS AND BRUSHES | |
| Solution tank | 65 L (modified LLDPE) |
| Recovery tank | 75 L (modified LLDPE) |
| Number of brushes | 1 |
| Brush diameter | 500 mm |
| Brush motor power | 550 W (24 V) |
| DIMENSIONS AND CONSTRUCTION | |
| Dimensions (L × W × H) | 1,300 × 830 × 1,010 mm |
| Weight without batteries | 135 kg |
| Chassis | 3–4 mm thick stainless steel |
| Noise level | 67 dB(A) at the operator's ear |
| Certification | CE |
Especially suitable for maintaining hard floors in medium-sized indoor areas (up to 1,000 m²).

Cleaning of aisles, order preparation areas and circulation areas in warehouses.

Maintenance of hard floors in factories and workshops, compatible with scrubber-type dirt.

Cleaning of sales areas, aisles and transit surfaces in supermarkets and shops.

Hospitals, schools, offices and stations. Periodic cleaning of common areas.
We help you confirm whether the CX520Z fits your surface and workload, or if you need to move up the range.