SCRUBBER-DRYER · WALK-BEHIND

CX680-Z

Wider scrubbing width and dual brush system to cover more surface in every pass. Stainless steel chassis, 65/75 L tanks and up to 3,400 m²/h of theoretical productivity in commercial, logistics and industrial environments.

CYNTEK CX680-Z
3,400m²/hMAX. THEORETICAL PRODUCTIVITY
680mmSCRUBBING WIDTH
65/75LTANKS (CLEAN/RECOVERY)
2.5–3hMAX. RUNTIME
OVERVIEW

More surface, same efficiency.

The CX680-Z is an industrial walk-behind scrubber-dryer with electric traction, designed for professional cleaning of hard floors in commercial, logistics and industrial facilities of medium to large size.

It features two 340 mm brushes with a 680 mm scrubbing width, allowing it to cover more surface per pass and reduce working times. It integrates mechanical scrubbing, cleaning solution application and dirty water suction through a rear squeegee in a single operation.

Its motorised traction system (brushless rear drive wheel) makes the machine easier to move forward and reduces the operator's physical effort, allowing maintenance tasks on large surfaces with total comfort.

CX680-Z detail in use
PROFESSIONAL PERFORMANCE

Built to last.

STAINLESS STEEL CHASSIS

3–4 mm thick structure with two-layer anti-corrosion primer and electrostatic powder coating.

DUAL BRUSH SYSTEM

Two 340 mm brushes with gearbox transmission and up to 30 kg of brush head pressure.

EFFICIENT CLEANING

Scrubbing and suction integrated in a single pass, leaving the floor clean and dry.

HIGH PERFORMANCE

Up to 3,400 m²/h of maximum theoretical productivity with a 680 mm scrubbing width.

CLEANING SYSTEM

Where the magic happens.

Scrubbing head
01

Scrubbing head

Two 340 mm brushes with gearbox transmission that act mechanically on the floor to loosen dirt and adhered residues.

  • Scrubbing width: 680 mm
  • 2 × 340 mm brushes at 200 rpm
  • Maximum pressure: 30 kg
  • Pedal lifting · Manual adjustment
  • Polypropylene (PP) brush, 0.5 mm bristles
Water application
02

Cleaning solution application

65-litre clean water tank with manual flow control via valve.

  • Solution tank: 65 L (modified LLDPE)
  • Removable stainless steel filter
  • 40 mm drain hose
  • Manual flow control via valve
Suction system
03

Suction and squeegee

Two-stage suction system with an 830 mm U-shaped squeegee that collects dirty water and leaves the floor with less surface moisture.

  • 24 V / 500 W motor
  • Vacuum pressure: 14 kPa · Max. airflow: 28 L/min
  • 830 mm squeegee, aluminium body and silicone blades
  • Pressure adjustment via two independent wheels
  • Steel mesh protection and electronic level sensor
SPECIFICATIONS

Detailed specifications.

All official technical data for the CX680-Z.

CX680-Z angled view
PERFORMANCE DATA
Max. theoretical productivity3,400 m²/h
Scrubbing width680 mm
Suction width830 mm
Max. brush head pressure30 kg
Max. speed5 km/h
ELECTRICAL SYSTEM AND BATTERIES
Operating voltage24 V
Standard battery2 × 12 V / 100 Ah AGM
Alternative battery1 × 24 V / 100 Ah lithium
Max. runtime2.5–3 hours
Battery indicatorVoltage level on the gauge
Low battery protectionBrushes and suction stop
ChargerExternal (100–240 V AC, 50–60 Hz; 24 V DC, 15 A)
TRACTION AND MANOEUVRABILITY
Traction systemRear drive wheel with brushless motor
Traction motor power24 V / 500 W
Forward / reverseYes / Yes
Speed controlHandlebar throttle
Max. slope16°
BrakesElectronic (service and parking)
TANKS AND BRUSHES
Solution tank65 L (modified LLDPE) · 40 mm drain
Recovery tank75 L (modified LLDPE) · 26 mm drain
Number of brushes2
Brush diameter340 mm
Brush speed200 rpm
Brush motor power24 V / 380 W × 2
Standard brush materialPP (polypropylene) · 0.5 mm bristles
DIMENSIONS AND CONSTRUCTION
Dimensions (L × W × H)1,300 × 830 × 1,010 mm
Battery box (L × W × H)340 × 330 × 280 mm
Front wheels2 × 200 × 50 mm · solid polyurethane tyre
Rear wheels2 × 100 × 40 mm · rubber
Chassis3–4 mm thick stainless steel
Noise level67 dB(A) at the operator's ear
SafetyFully guarded moving parts · emergency stop
CertificationCE
IS THIS YOUR MACHINE?

Talk to a distributor.

We help you confirm whether the CX680-Z fits your surface and workload, or if you need to move up the range.