SCRUBBER-DRYER · RIDE-ON

CX800

Ride-on industrial scrubber-dryer with dual 380 mm brush system and automatic brush head adjustment. 4–5 mm stainless steel chassis, 90/100 L tanks and up to 5,320 m²/h of theoretical productivity for large surfaces.

CYNTEK CX800
5,320m²/hMAX. THEORETICAL PRODUCTIVITY
760mmSCRUBBING WIDTH
90/100LTANKS (CLEAN/RECOVERY)
3–4hMAX. RUNTIME
OVERVIEW

Maximum productivity on large surfaces.

The CX800 is a ride-on industrial scrubber-dryer with electric traction, designed for professional cleaning of hard floors in large commercial, logistics and industrial facilities.

It features two 380 mm brushes with a 760 mm scrubbing width and a brush head with automatic adjustment via push rod, allowing it to adapt to the floor and maintain constant pressure. It integrates mechanical scrubbing, cleaning solution application and dirty water suction in a single pass.

Its motorised traction system (brushless rear drive wheel) with accelerator pedal makes the machine easier to drive and reduces the operator's physical effort, allowing maintenance tasks on large surfaces with total comfort and productivity.

CX800 detail in use
PROFESSIONAL PERFORMANCE

Built to last.

STAINLESS STEEL CHASSIS

4–5 mm thick structure with double anti-corrosion primer and electrostatic powder coating.

AUTOMATIC BRUSH HEAD

Brush head adjustment via push rod, with up to 35 kg of pressure and actuator lifting.

EFFICIENT CLEANING

Scrubbing and suction integrated in a single pass, leaving the floor clean and dry.

HIGH PERFORMANCE

Up to 5,320 m²/h of maximum theoretical productivity with a 760 mm scrubbing width.

CLEANING SYSTEM

Where the magic happens.

Scrubbing head
01

Scrubbing head

Two 380 mm brushes with gearbox transmission and automatic adjustment via push rod to adapt to the floor.

  • Scrubbing width: 760 mm
  • 2 × 380 mm brushes at 200 rpm
  • Maximum pressure: 35 kg
  • Actuator lifting
  • Polypropylene (PP) brush, 0.5 mm bristles
Water application
02

Cleaning solution application

90-litre clean water tank with flow control from the control panel via solenoid valve.

  • Solution tank: 90 L (modified LLDPE)
  • Removable stainless steel filter
  • Panel control + solenoid valve
  • 40 mm drain hose
Suction system
03

Suction and squeegee

Two-stage suction system with a 1,120 mm U-shaped squeegee and actuator lifting.

  • 24 V / 500 W motor
  • Vacuum pressure: 14 kPa · Max. airflow: 28 L/min
  • 1,120 mm squeegee, aluminium body and silicone blades
  • Pressure adjustment via two independent wheels
  • Actuator lifting · Tool-free blade replacement
SPECIFICATIONS

Detailed specifications.

All official technical data for the CX800.

CX800 angled view
PERFORMANCE DATA
Max. theoretical productivity5,320 m²/h
Scrubbing width760 mm
Suction width1,120 mm
Max. brush head pressure35 kg
Max. speed6 km/h
ELECTRICAL SYSTEM AND BATTERIES
Operating voltage24 V
Battery typeValve-regulated lead-acid (VRLA)
Battery model4-EVF-153, 8 V / 153 Ah
Number of batteries3 units
Max. runtime3–4 hours
Battery indicatorVoltage indicator on gauge or LCD screen
Low battery protectionBrushes and suction stop
ChargerExternal (100–240 V AC, 50–60 Hz; 24 V DC, 20 A)
TRACTION AND MANOEUVRABILITY
Traction systemRear drive wheel with brushless motor
Traction motor power500 W (24 V)
DriveAccelerator pedal
Forward / reverseYes / Yes
Max. slope16°
BrakesElectronic / mechanical (service and parking)
TANKS AND BRUSHES
Solution tank90 L (modified LLDPE) · 40 mm drain
Recovery tank100 L (modified LLDPE) · 26 mm drain
Number of brushes2
Brush diameter380 mm
Brush speed200 rpm
Brush motor power2 × 380 W (24 V)
Standard brush materialPP (polypropylene) · 0.5 mm bristles
DIMENSIONS AND CONSTRUCTION
Dimensions (L × W × H)1,630 × 1,130 × 1,280 mm
Battery box (L × W × H)440 × 360 × 250 mm
Front wheel1 × 200 × 60 mm · solid polyurethane tyre
Rear wheels2 × 250 × 80 mm · solid polyurethane tyre
Chassis4–5 mm thick stainless steel
Noise level67 dB(A) at the operator's ear
SafetyFully guarded moving parts · emergency stop
CertificationCE
IS THIS YOUR MACHINE?

Talk to a distributor.

We help you confirm whether the CX800 fits your surface and workload, or if you need to move up the range.