CYNTEK / THE BRAND

Built for the next shift.
And the next.
And the next.

Not a catalogue promise. It's what happens when the machine has been working for hours: it keeps responding.

CYNTEK machine in real use during a working shift
PHILOSOPHY

A machine isn't judged in the catalogue.
It's judged in the work…

CYNTEK was born from an uncomfortable situation in the professional cleaning machinery market: prices keep going up but quality doesn't always follow. More expensive machines, more complex, and not always better thought out for real work. We wanted to do the opposite: machines designed to clean well, from the first shift to the last.

That's why we build more robust, more reliable machines that are better prepared for their job. We add technology when it genuinely helps: when the operator works better, when the machine lasts longer and when the cost per m² is what it should be. More advanced than the competition. Better thought out. With a price-quality ratio that needs no justification.

We don't design for the demo. We design for everyday work: the ramp, the stuck residue, the mid-shift consumable change, the charge that runs long. Everything in our machines exists to make your everyday work easier.

Close-up of a CYNTEK machine in use during a working day

Cleaning machines designed to clean better.
Built for the next shift… and the one after.

REAL USE

Three people.
One same shift.

Every CYNTEK machine is used from three sides at once. If one fails, the other two feel it.

Operator working with a CYNTEK machine
01

The operator

Spends eight hours with the machine. What a spec sheet calls "ergonomics", to them means finishing the shift without back pain and with the same focus as at the start.

  • Clear controls, reachable without looking away
  • Handlebar and seat designed for full shifts
  • Visibility and safety on ramps and turns
  • Fewer repeated movements: less accumulated fatigue
Technician changing a consumable on a CYNTEK machine
02

Maintenance

Changing a brush shouldn't be a problem. What a spec sheet calls "accessible maintenance", to them means changing the squeegee between shifts without stopping the operation.

  • Quick-release consumables, no tools needed
  • Self-cleaning of the machine at the end of the shift
  • Direct access to critical components
  • Original spare parts through the distributor network
CYNTEK machine working in a large surface
03

The operation

What a spec sheet calls "performance", to them means knowing how many m² are cleaned per shift, how many stops there will be and what each one will cost.

  • Sustained performance hour after hour
  • Real runtime of 2.5 to 5 h depending on model
  • Fewer unplanned stops
  • Predictable cost per m²
THE CYCLE

One shift.
And the next.

This is how a CYNTEK is used, from start to finish. And then again.

  1. Start of shift: machine ready and charged
    01

    Start of shift

    The machine is ready. No need to prepare it: it prepared itself while charging.

  2. Continuous work: machine making a pass
    02

    Continuous work

    Hours later, performance is the same as on the first pass.

  3. Tool-free consumable change
    03

    Consumable change

    Brush or squeegee, no tools. Minutes, not stops.

  4. Self-cleaning of the machine at the end of the shift
    04

    End of shift

    Self-cleaning: the machine cleans itself.

  5. Battery charging between shifts
    05

    Charging

    Vehicle-grade safety charger. It charges while the shift rests.

  6. Next shift: machine ready again
    06

    Next shift

    And the next. And the next.

IN NUMBERS

What holds the shift together.

2.5–5h REAL RUNTIME DEPENDING ON MODEL
2,600–9,800m²/h RANGE PERFORMANCE
30–55kg BRUSH PRESSURE
3–5mm STAINLESS STEEL CHASSIS THICKNESS
REAL ENVIRONMENTS

Every floor has its shift.

Cleaning a warehouse with swarf is not the same as a facility with constant traffic. The machine is chosen for the shift, not for the catalogue.

THE RANGE

Choose the one that holds your shift.

Walk-behind scrubbers, ride-on scrubbers and sweepers. Seven models with the same idea: the machine keeps responding as the shift goes on.

WALK-BEHIND CX520-Z

CX520-Z / CX680-Z

Performance 2,600–3,400 m²/h
Width 520–680 mm
RIDE-ON CX900

CX700 → CX1000

Performance 4,900–9,000 m²/h
Width 700–1,000 mm
SWEEPER CS1400

CS1400

Performance 9,800 m²/h
Width 1,400 mm
CYNTEK NETWORK

When the machine works,
you're not alone.

CYNTEK works through a network of professional distributors. Local support, original spare parts and training so the shift doesn't stop for a part.

  • Network of professional distributors
  • Local technical support
  • Training and original spare parts
CYNTEK distributor
LET'S TALK

Built for the next shift.
Tell us which one is yours.

Tell us what you need to clean, in which environment and with what workload. We'll help you find the right machine and the right distributor.